Product Description

3m Roller Shutter Door Rubber Seal – 75mm T-Bar

This 3m roller shutter door rubber seal is designed to fit standard 75mm T-bar bottom sections on commercial roller shutter doors. The wrap-around design fits around the T-bar to provide a flexible seal between the bottom of the door and the floor.

The rubber profile helps reduce gaps beneath the closed roller shutter door and can help reduce water, wind-driven rain, draughts, leaves, dust and debris entering the building.

What is the seal used for?

Commercial roller shutter doors can have gaps between the bottom of the door and the floor, particularly where the floor is uneven. These gaps can allow rainwater, draughts, leaves and debris to enter.

This wrap-around roller shutter door seal is designed to fit around the underside of a standard 75mm T-bar and provide a flexible seal along the bottom of the door.

It is suitable for compatible commercial roller shutter doors used in warehouses, workshops, commercial premises and other buildings.

Key features

• 3m (9’10”) length
• Designed for standard 75mm T-bar bottom sections
• Flexible rubber construction
• Helps reduce water and wind-driven rain
• Helps reduce leaves, dust and debris
• Helps reduce draughts beneath the door
• Can help close gaps of up to approximately 30mm
• No fixings or sealant required
• Can be cut to the required length

3m length

This roller shutter door rubber seal is supplied as a 3 metre (9’10”) length, making it suitable for commercial roller shutter doors where this length is required.

Please check the required length before ordering and make sure your door has a compatible standard 75mm T-bar bottom section.

Fitting

The seal is designed to wrap around the standard 75mm T-bar at the bottom of the roller shutter door.

Cut the seal to the required length if necessary, then insert the back of the T-bar into the rubber slot and work the seal around the front of the T-bar.

No additional fixings or sealant are required when fitted correctly to a compatible T-bar.

Before ordering

Please check that your roller shutter door has a standard 75mm T-bar bottom section before ordering. This product is designed specifically for this type of T-bar and may not be suitable for other bottom rail profiles.